# Electromagnetism, Oscillations, Waves & Optics

> 32 introductory college physics flashcards on electrostatics, circuits, magnetic forces, harmonic motion, sound, and geometrical and wave optics. Assumes algebra, trigonometry, vectors and basic calculus.

- **Canonical URL:** https://flashcards.world/flashcards/sets/3bf1a8ab-8e07-4d67-a711-1bedf38bb6a8/
- **Markdown URL:** https://flashcards.world/flashcards/sets/3bf1a8ab-8e07-4d67-a711-1bedf38bb6a8.md
- **Category:** Physics
- **Level:** intermediate
- **Languages:** en → en
- **Total Cards:** 32

## Flashcards (32 Cards)

| # | Front (Term / Prompt) | Back (Definition / Answer) | Example | Multiple-Choice Options |
| :--- | :--- | :--- | :--- | :--- |
| 1 | When does total internal reflection occur, and what is the critical angle? | At an ideal interface between transparent media with n1 > n2, incidence from medium 1 gives total internal reflection when θ > θ_c, where sinθ_c = n2/n1 and angles are measured from the normal. There is no propagating refracted ray, although an evanescent field extends into medium 2. |  |  |
| 2 | How is energy shared in an ideal undriven, undamped mass–spring oscillator? | Taking potential energy as zero at equilibrium, E = ½mv² + ½kx² = ½kA² remains constant. At x = ±A, speed is zero and the energy is potential. At x = 0, potential energy is zero and kinetic energy is maximum. |  |  |
| 3 | What force acts on a straight wire carrying current in a uniform magnetic field? | Vector force: F = I(L × B), where L points along the conventional current and has magnitude equal to the wire length. The force magnitude is \|F\| = ILB sinθ, with I the current magnitude and θ the angle between L and B. |  |  |
| 4 | What magnetic force acts on a moving point charge, and does it do work? | Vector force: F_B = q(v × B); magnitude: \|F_B\| = \|q\|vB sinθ. The right-hand rule gives v × B, reversed for negative q. Because F_B·v = 0, the magnetic force alone does no work on the charge and cannot change its kinetic energy. |  |  |
| 5 | What are the frequency and period of an ideal undamped mass–spring oscillator? | For mass m and a massless linear spring with stiffness k, ω = √(k/m), T = 2π√(m/k) and f = 1/T. The period is independent of amplitude within this ideal linear model. |  |  |
| 6 | What is the thin-lens equation under the real-is-positive sign convention? | In the paraxial thin-lens model with the same surrounding medium on both sides, 1/f = 1/d_o + 1/d_i. A real object has d_o > 0 and a virtual object d_o < 0; a real image has d_i > 0 and a virtual image d_i < 0. Converging lenses have f > 0; diverging lenses have f < 0. |  |  |
| 7 | What is the small-angle period of a simple pendulum? | For a point-mass bob on a massless inextensible support of length L in uniform gravity g, T ≈ 2π√(L/g). This uses sinθ ≈ θ with θ in radians. The period is independent of bob mass and only approximately independent of amplitude at small angles. |  |  |
| 8 | How does damping affect displacement resonance in a driven oscillator? | For ẍ + 2βẋ + ω0²x = (F0/m)cos(ωt), with fixed F0 and positive damping β, the steady displacement amplitude peaks at ω = √(ω0² − 2β²) if 0 < β < ω0/√2. This approaches ω0 for weak damping. Stronger damping removes that positive-frequency peak; maximum absorbed power is a different criterion. |  |  |
| 9 | What are Ohm’s law and the resistance formula for a uniform conductor? | For an ohmic conductor under fixed physical conditions, V = IR. For length L, uniform cross-sectional area A and uniform resistivity ρ, R = ρL/A. Resistance is measured in Ω and resistivity in Ω·m; temperature changes can change ρ and R. |  |  |
| 10 | What is Malus’s law for an ideal analyzer? | For incident linearly polarized light of intensity I0, the transmitted intensity is I = I0 cos²θ. The angle θ is between the incident electric-field polarization direction and the analyzer’s transmission axis. At θ = 90°, ideal transmission is zero. |  |  |
| 11 | What torque acts on a planar coil in a uniform magnetic field? | For N identical turns of area A carrying current I, the magnetic moment vector is μ = NIA n, where n is the right-hand-rule unit normal. Vector torque: τ = μ × B. Its magnitude is \|τ\| = NIAB sinθ, where θ is the angle between μ and B. |  |  |
| 12 | What equation and solution define undamped simple harmonic motion? | With displacement x measured from equilibrium and constant angular frequency ω > 0, ẍ + ω²x = 0. Its real solution is x(t) = A cos(ωt + φ), where A is amplitude and φ is phase. Acceleration is a = −ω²x, toward equilibrium. |  |  |
| 13 | What normal-mode frequencies are allowed on an ideal string fixed at both ends? | For a uniform string of length L, tension T and linear mass density μ, wave speed is v = √(T/μ) and f_n = nv/(2L), n = 1, 2, 3, …. Both ends are displacement nodes. All integer harmonics are allowed, but the excitation determines which are actually present. |  |  |
| 14 | What kind of wave is sound in a fluid, and what determines its speed? | For small adiabatic disturbances in a fluid, sound is a longitudinal pressure/density wave with speed v = √(B_s/ρ), where B_s is the isentropic bulk modulus and ρ is the equilibrium density. A material medium is required. Solids can also support shear waves, so this formula is not universal for solids. |  |  |
| 15 | How does Ampère’s law give the field outside an ideal long straight wire? | For steady currents in vacuum, ∮B·dl = μ0 I_enclosed. Cylindrical symmetry gives B = μ0 I/(2πr) outside the wire, with r measured from its axis and I the current magnitude; direction follows the right-hand rule. μ0 ≈ 4π × 10⁻⁷ T·m/A is approximate, not exact in the revised SI. |  |  |
| 16 | What is optical dispersion, and why does an ordinary glass prism separate white light? | Dispersion means that refractive index varies with light frequency. In the normal-dispersion range of ordinary glass for visible light, violet has a higher refractive index than red and is deviated more by a prism. Different colors therefore emerge in different directions. |  |  |
| 17 | How do the modes of open–open and open–closed ideal pipes differ? | Neglecting end corrections, an open end is a displacement antinode and pressure node; a closed end is the reverse. Open–open: f_n = nv/(2L), n = 1, 2, 3, …. Open–closed: f_m = mv/(4L), m = 1, 3, 5, …. Here L is pipe length and v is sound speed. |  |  |
| 18 | How do ideal capacitances combine in series and in parallel? | Parallel: C_eq = ΣC_i, with the same voltage across each capacitor. Series: 1/C_eq = Σ(1/C_i). In the standard initially uncharged series chain, equal charge magnitudes build up on the capacitors and their voltage differences add. |  |  |
| 19 | How is sound intensity level expressed in decibels? | β = 10 log10(I/I0) dB, with intensity I in W/m² and the conventional reference I0 = 10⁻¹² W/m². An increase of 10 dB means ten times the intensity; 20 dB means one hundred times. These ratios do not directly specify perceived loudness. |  |  |
| 20 | What three equivalent formulas give the power dissipated in an ohmic resistor? | P = IV = I²R = V²/R, where V is the voltage drop across resistance R and I is the current. These are instantaneous relations; for steady DC they give constant power. Power is measured in watts (W). |  |  |
| 21 | What causes acoustic beats, and what is their frequency? | Two sound waves with nearby frequencies interfere to produce periodic changes in amplitude and loudness. The beat rate is f_beat = \|f1 − f2\|. Bringing the frequencies closer together slows the beats; equal frequencies remove this beating. |  |  |
| 22 | What does Gauss’s law imply for a conductor and an empty closed cavity at electrostatic equilibrium? | For a closed surface, ∮E·dA = Q_enclosed/ε0. The field in conducting material is zero at electrostatic equilibrium, since a nonzero field would move free charges. An empty closed cavity in an equipotential conductor is also field-free. Zero enclosed charge alone means zero net flux, not necessarily zero field. |  |  |
| 23 | How is the electric field defined, and how do point-charge field lines run? | E = F/q0 is the force per unit small positive test charge, in N/C or V/m; E and F are vectors. Field lines point away from a positive point charge and toward a negative one. Closer line spacing represents a stronger field. |  |  |
| 24 | What is capacitance, and when is C = κ ε0 A/d valid? | Capacitance is C = Q/V, with Q the charge magnitude on either plate and V the potential-difference magnitude; 1 F = 1 C/V. For parallel plates of area A and separation d, uniformly filled with a linear dielectric of relative permittivity κ and with negligible edge effects, C = κ ε0 A/d. |  |  |
| 25 | What do Kirchhoff’s junction and loop rules express? | At a node with no charge accumulation, ΣI_in = ΣI_out by charge conservation. A loop equation balances voltage changes and source emfs consistently with energy conservation. If changing magnetic flux links the loop, include the induced emf −dΦ_B/dt; then ∮E·dl is not generally zero. |  |  |
| 26 | What are the laws of reflection and refraction at an ordinary transparent interface? | Angles are measured from the surface normal. Reflection: θ_reflected = θ_incident. Refraction: n1 sinθ1 = n2 sinθ2. For non-normal incidence into a higher-index medium (n2 > n1), the transmitted ray bends toward the normal and its speed decreases, since v = c/n. |  |  |
| 27 | What does the sign and magnitude of lateral lens magnification mean? | Using the real-is-positive thin-lens convention, m = h_i/h_o = −d_i/d_o. Positive m means upright relative to the object; negative m means inverted. \|m\| > 1 means enlarged and \|m\| < 1 means reduced. Real versus virtual is determined by ray convergence and the sign of d_i, not by m alone. |  |  |
| 28 | Why is an electrostatic field perpendicular to an equipotential surface where E ≠ 0? | Along the surface, dV = −E·dl = 0 for every tangent displacement dl. Thus the field has no tangent component and is normal to the surface. Where E = 0, the field has no defined direction. |  |  |
| 29 | What are the ideal double-slit interference conditions? | For equal coherent, in-phase illumination of two narrow slits with the same polarization, bright fringes satisfy d sinθ = mλ and dark fringes d sinθ = (m + ½)λ, for integer m. Here d is slit separation and λ is wavelength. For a distant screen at distance L and small angles, adjacent bright fringes are separated by Δy ≈ λL/d. |  |  |
| 30 | How do ideal positive resistances combine in series and in parallel? | Series: R_eq = ΣR_i, with the same current through each resistor. Parallel: 1/R_eq = Σ(1/R_i), with the same voltage across each branch. With at least two finite positive parallel resistances, R_eq is smaller than the smallest individual resistance. |  |  |
| 31 | How are electrostatic potential difference, energy change and work related? | For a charge q, ΔU = qΔV and the electric field does work W_field = −qΔV. If kinetic energy is unchanged and only the electric force and an external agent do work, W_ext = qΔV. Potential is energy per unit charge: 1 V = 1 J/C. |  |  |
| 32 | What is Coulomb’s law for two stationary point charges in vacuum? | The force magnitude is F = k_e \|q1 q2\|/r², where r is their separation and k_e = 1/(4π ε0) ≈ 8.988 × 10⁹ N·m²/C². The force acts along the line joining the charges: like signs repel and opposite signs attract. |  |  |

---
Study this deck interactively with FSRS-6 spaced repetition, audio review, and multiple-choice mode at [Flashcards World](https://flashcards.world/flashcards/sets/3bf1a8ab-8e07-4d67-a711-1bedf38bb6a8/).
