Electromagnetism, Oscillations, Waves & Optics

32 introductory college physics flashcards on electrostatics, circuits, magnetic forces, harmonic motion, sound, and geometrical and wave optics. Assumes algebra, trigonometry, vectors and basic calculus.

Category
Physics
Level
intermediate
Languages
en → en
Cards
32
Markdown
Electromagnetism, Oscillations, Waves & Optics (.md)

Flashcards (32)

#Front (Term / Question)Back (Definition / Answer)ExampleMultiple-Choice Options
1When does total internal reflection occur, and what is the critical angle?At an ideal interface between transparent media with n1 > n2, incidence from medium 1 gives total internal reflection when θ > θ_c, where sinθ_c = n2/n1 and angles are measured from the normal. There is no propagating refracted ray, although an evanescent field extends into medium 2.
2How is energy shared in an ideal undriven, undamped mass–spring oscillator?Taking potential energy as zero at equilibrium, E = ½mv² + ½kx² = ½kA² remains constant. At x = ±A, speed is zero and the energy is potential. At x = 0, potential energy is zero and kinetic energy is maximum.
3What force acts on a straight wire carrying current in a uniform magnetic field?Vector force: F = I(L × B), where L points along the conventional current and has magnitude equal to the wire length. The force magnitude is |F| = ILB sinθ, with I the current magnitude and θ the angle between L and B.
4What magnetic force acts on a moving point charge, and does it do work?Vector force: F_B = q(v × B); magnitude: |F_B| = |q|vB sinθ. The right-hand rule gives v × B, reversed for negative q. Because F_B·v = 0, the magnetic force alone does no work on the charge and cannot change its kinetic energy.
5What are the frequency and period of an ideal undamped mass–spring oscillator?For mass m and a massless linear spring with stiffness k, ω = √(k/m), T = 2π√(m/k) and f = 1/T. The period is independent of amplitude within this ideal linear model.
6What is the thin-lens equation under the real-is-positive sign convention?In the paraxial thin-lens model with the same surrounding medium on both sides, 1/f = 1/d_o + 1/d_i. A real object has d_o > 0 and a virtual object d_o < 0; a real image has d_i > 0 and a virtual image d_i < 0. Converging lenses have f > 0; diverging lenses have f < 0.
7What is the small-angle period of a simple pendulum?For a point-mass bob on a massless inextensible support of length L in uniform gravity g, T ≈ 2π√(L/g). This uses sinθ ≈ θ with θ in radians. The period is independent of bob mass and only approximately independent of amplitude at small angles.
8How does damping affect displacement resonance in a driven oscillator?For ẍ + 2βẋ + ω0²x = (F0/m)cos(ωt), with fixed F0 and positive damping β, the steady displacement amplitude peaks at ω = √(ω0² − 2β²) if 0 < β < ω0/√2. This approaches ω0 for weak damping. Stronger damping removes that positive-frequency peak; maximum absorbed power is a different criterion.
9What are Ohm’s law and the resistance formula for a uniform conductor?For an ohmic conductor under fixed physical conditions, V = IR. For length L, uniform cross-sectional area A and uniform resistivity ρ, R = ρL/A. Resistance is measured in Ω and resistivity in Ω·m; temperature changes can change ρ and R.
10What is Malus’s law for an ideal analyzer?For incident linearly polarized light of intensity I0, the transmitted intensity is I = I0 cos²θ. The angle θ is between the incident electric-field polarization direction and the analyzer’s transmission axis. At θ = 90°, ideal transmission is zero.
11What torque acts on a planar coil in a uniform magnetic field?For N identical turns of area A carrying current I, the magnetic moment vector is μ = NIA n, where n is the right-hand-rule unit normal. Vector torque: τ = μ × B. Its magnitude is |τ| = NIAB sinθ, where θ is the angle between μ and B.
12What equation and solution define undamped simple harmonic motion?With displacement x measured from equilibrium and constant angular frequency ω > 0, ẍ + ω²x = 0. Its real solution is x(t) = A cos(ωt + φ), where A is amplitude and φ is phase. Acceleration is a = −ω²x, toward equilibrium.
13What normal-mode frequencies are allowed on an ideal string fixed at both ends?For a uniform string of length L, tension T and linear mass density μ, wave speed is v = √(T/μ) and f_n = nv/(2L), n = 1, 2, 3, …. Both ends are displacement nodes. All integer harmonics are allowed, but the excitation determines which are actually present.
14What kind of wave is sound in a fluid, and what determines its speed?For small adiabatic disturbances in a fluid, sound is a longitudinal pressure/density wave with speed v = √(B_s/ρ), where B_s is the isentropic bulk modulus and ρ is the equilibrium density. A material medium is required. Solids can also support shear waves, so this formula is not universal for solids.
15How does Ampère’s law give the field outside an ideal long straight wire?For steady currents in vacuum, ∮B·dl = μ0 I_enclosed. Cylindrical symmetry gives B = μ0 I/(2πr) outside the wire, with r measured from its axis and I the current magnitude; direction follows the right-hand rule. μ0 ≈ 4π × 10⁻⁷ T·m/A is approximate, not exact in the revised SI.
16What is optical dispersion, and why does an ordinary glass prism separate white light?Dispersion means that refractive index varies with light frequency. In the normal-dispersion range of ordinary glass for visible light, violet has a higher refractive index than red and is deviated more by a prism. Different colors therefore emerge in different directions.
17How do the modes of open–open and open–closed ideal pipes differ?Neglecting end corrections, an open end is a displacement antinode and pressure node; a closed end is the reverse. Open–open: f_n = nv/(2L), n = 1, 2, 3, …. Open–closed: f_m = mv/(4L), m = 1, 3, 5, …. Here L is pipe length and v is sound speed.
18How do ideal capacitances combine in series and in parallel?Parallel: C_eq = ΣC_i, with the same voltage across each capacitor. Series: 1/C_eq = Σ(1/C_i). In the standard initially uncharged series chain, equal charge magnitudes build up on the capacitors and their voltage differences add.
19How is sound intensity level expressed in decibels?β = 10 log10(I/I0) dB, with intensity I in W/m² and the conventional reference I0 = 10⁻¹² W/m². An increase of 10 dB means ten times the intensity; 20 dB means one hundred times. These ratios do not directly specify perceived loudness.
20What three equivalent formulas give the power dissipated in an ohmic resistor?P = IV = I²R = V²/R, where V is the voltage drop across resistance R and I is the current. These are instantaneous relations; for steady DC they give constant power. Power is measured in watts (W).
21What causes acoustic beats, and what is their frequency?Two sound waves with nearby frequencies interfere to produce periodic changes in amplitude and loudness. The beat rate is f_beat = |f1 − f2|. Bringing the frequencies closer together slows the beats; equal frequencies remove this beating.
22What does Gauss’s law imply for a conductor and an empty closed cavity at electrostatic equilibrium?For a closed surface, ∮E·dA = Q_enclosed/ε0. The field in conducting material is zero at electrostatic equilibrium, since a nonzero field would move free charges. An empty closed cavity in an equipotential conductor is also field-free. Zero enclosed charge alone means zero net flux, not necessarily zero field.
23How is the electric field defined, and how do point-charge field lines run?E = F/q0 is the force per unit small positive test charge, in N/C or V/m; E and F are vectors. Field lines point away from a positive point charge and toward a negative one. Closer line spacing represents a stronger field.
24What is capacitance, and when is C = κ ε0 A/d valid?Capacitance is C = Q/V, with Q the charge magnitude on either plate and V the potential-difference magnitude; 1 F = 1 C/V. For parallel plates of area A and separation d, uniformly filled with a linear dielectric of relative permittivity κ and with negligible edge effects, C = κ ε0 A/d.
25What do Kirchhoff’s junction and loop rules express?At a node with no charge accumulation, ΣI_in = ΣI_out by charge conservation. A loop equation balances voltage changes and source emfs consistently with energy conservation. If changing magnetic flux links the loop, include the induced emf −dΦ_B/dt; then ∮E·dl is not generally zero.
26What are the laws of reflection and refraction at an ordinary transparent interface?Angles are measured from the surface normal. Reflection: θ_reflected = θ_incident. Refraction: n1 sinθ1 = n2 sinθ2. For non-normal incidence into a higher-index medium (n2 > n1), the transmitted ray bends toward the normal and its speed decreases, since v = c/n.
27What does the sign and magnitude of lateral lens magnification mean?Using the real-is-positive thin-lens convention, m = h_i/h_o = −d_i/d_o. Positive m means upright relative to the object; negative m means inverted. |m| > 1 means enlarged and |m| < 1 means reduced. Real versus virtual is determined by ray convergence and the sign of d_i, not by m alone.
28Why is an electrostatic field perpendicular to an equipotential surface where E ≠ 0?Along the surface, dV = −E·dl = 0 for every tangent displacement dl. Thus the field has no tangent component and is normal to the surface. Where E = 0, the field has no defined direction.
29What are the ideal double-slit interference conditions?For equal coherent, in-phase illumination of two narrow slits with the same polarization, bright fringes satisfy d sinθ = mλ and dark fringes d sinθ = (m + ½)λ, for integer m. Here d is slit separation and λ is wavelength. For a distant screen at distance L and small angles, adjacent bright fringes are separated by Δy ≈ λL/d.
30How do ideal positive resistances combine in series and in parallel?Series: R_eq = ΣR_i, with the same current through each resistor. Parallel: 1/R_eq = Σ(1/R_i), with the same voltage across each branch. With at least two finite positive parallel resistances, R_eq is smaller than the smallest individual resistance.
31How are electrostatic potential difference, energy change and work related?For a charge q, ΔU = qΔV and the electric field does work W_field = −qΔV. If kinetic energy is unchanged and only the electric force and an external agent do work, W_ext = qΔV. Potential is energy per unit charge: 1 V = 1 J/C.
32What is Coulomb’s law for two stationary point charges in vacuum?The force magnitude is F = k_e |q1 q2|/r², where r is their separation and k_e = 1/(4π ε0) ≈ 8.988 × 10⁹ N·m²/C². The force acts along the line joining the charges: like signs repel and opposite signs attract.